An Introduction to the Fundamentals of Coagulation: Laboratory Tests of Hemostatic Function

Collecting Blood Specimens for Coagulation Testing

  • The specimen of choice for coagulation testing is plasma.
  • Venous blood is drawn into a 3.2% buffered sodium citrate tube (blue top tube), yielding a whole blood sample with a 9:1 blood to anticoagulant ratio. Inadequate filling of the collection tube will decrease this ratio, and may affect test results.
  • A blue top tube used for coagulation testing should be drawn before any other tubes containing additives. This includes tubes containing other anticoagulants and/or plastic serum tubes containing clot activators. A serum tube that does not contain an additive can be collected before the blue top tube.
  • If a winged blood collection set is used in drawing a specimen for coagulation testing, a discard tube should be drawn first. The discard tube must be used to fill the blood collection tubing dead space to assure that the proper anticoagulant/blood ratio is maintained, but the discard tube does not need to be completely filled. The discard tube should be a nonadditive or a coagulation tube.
  • If a blood specimen used for coagulation testing must be collected from an indwelling line that may contain heparin, the line should be flushed with 5 mL of saline, and the first 5 mL of blood or 6-times the line volume (dead space volume of the catheter) be drawn off and discarded before the coagulation tube is filled.

Review for ASCP Boards or test your clinical laboratory science knowledge with the FREE LabCE.com Quiz Game.

Fundamentals of Hemostasis course details »

Learn more about medical technologist continuing education for MTs, MLTs, and other lab personnel »

Get information on laboratory compliance training for clinical and medical laboratories »