Dispose Information and Courses from MediaLab, Inc.

A supervisor is the laboratory director's designee for monitoring compliance with all applicable regulations of the board and the department. Other duties include: Performing the duties of a technologist, if needed, in the specialty area(s) where licensure is held Assigning direct supervision responsibilities to licensed technologists if needed, while ensuring that direct supervision of technicians is properly performed. Evaluating technologists' and technicians' competency in running tests and reporting results Being available to all personnel to answer questions and resolve problems Providing day-to-day supervision of test performance, including on-site direct supervision of testing that is performed by technicians Ensuring that quality control is performed and corrective action taken if necessary Ensuring that no patient testing is reported until corrective action has been taken and the test system is properly functioning Providing orientation to all testing personnel Implementing a quality maintenance program

Do not leave test orders or test results in areas where they can be viewed by patients.Do not discuss test results or any patient information in areas where patients can overhear the conversation. Be careful not to discuss confidential information on the telephone where patients can overhear the conversation.Do not provide supplies to physician offices other than those usually provided by the laboratory. Document any supplies given to an office.Do not supply items that the office can use for testing (e.g. urine dipsticks). Do not allow offices to dispose of biohazard waste or sharps in the waste containers paid for by the laboratory.

Follow this order whenever you wash your hands: Remove and dispose of gloves. Wet hands. Use liquid soap (bacteria live in soap dishes). Wash for at least 15 seconds, cleaning all surfaces (including under fingernails). Don't touch faucets after washing (don't recontaminate your hands). Dry with paper towels. Turn off faucets with paper towels.

It is important to always dispose of contaminated wastes properly!Examples of contaminated wastes: Microbiology waste and pathology waste All body fluids, such as pleural fluid Contaminated sharps and blood specimens

The correct course of action if a spill or leak occurs. How to dispose of the chemical properly.

In case of a spill first, dike up the formaldehyde with absorbent pillows.Then dispose of these pillows in a sealed, formaldehyde-labeled container.Your supervisor will show you the location of these emergency spill clean-up materials or discuss alternative procedures.

Smalll spills (generally less than one liter) may in most instances by handled by laboratory or other employees. However, if you experience symptoms of over-exposure during the clean up, such as burning eyes, or throat irritation, immediately leave the cleanup area and get help from your institution's Spill Response team or other designated persons.Larger spills (generally greater than 1 liter) will usually require immediate assistance from the Spill Response team or other designees. There are several ways to clean up small spills, two of which are described below:1. Dike up the formaldehyde with absorbent pillows. Then dispose of these pillows in a sealed, formaldehyde-labeled container. 2. A chemical that reacts with and neutralizes formalin such as ALDEX® may be used to treat the spill.Your supervisor will show you the location of these emergency spill clean-up materials or discuss alternative procedures. Be sure to follow your own institution's policies and procedures in regard to formalin spills.

After collecting the blood specimen into a syringe, properly activate the appropriate safety device, and dispose of the needle in a sharps container.Attach the syringe to a blood transfer device by twisting the needle tip into the hub of the device.Push a vacuum blood collection tube into the holder of the transfer device, and let the tube fill to the appropriate level.